Our glass manifestation dots are available in two sizes. In both Frost or Solid vinyl colours.

• 50mm diameter dots with a 50mm space between each dot
• 50mm diameter dots with 100mm space between each dot

Film Length: 1.2 Metre          Design: Pre-cut design and space for glass

All of our glass manifestation dots are produced in accordance with the Approved Document M and Document N and can be easily installed on the existing glazing. Our vinyl glass manifestation dots are designed to offer a flexible low-cost alternative to the traditional acid etching or sandblasting of glass. Supplied complete with a pre-masked application tape for fast and easy installation.

In order to comply with the requirements of Section N2 of Approved Document N (glazing safety) all areas of glazing in ‘critical locations’ in which people are moving and might not be aware of the presence of the glazing should be marked. Critical locations include large uninterrupted areas of transparent glazing, which form, or are part of the internal or external glazed, partitions, walls and doors.

Sections M1 and M2 of Approved Document M (Access to and use of buildings) requires all glass doors to be clearly defined with a manifestation design on the glass at two levels and contrasting visually with the background seen through the glass. The glass manifestation dots must be clearly defined at two levels 850mm to 1000mm and 1400mm to 1600mm.

If you need a bespoke design or colour, please do not hesitate to contact us on 01428 751004 or email sales@windowfilmsuk.com